Standard Hot Pot Gel Timer

DETERMINES GEL TIME AT TEMPERATURES UP TO 350º F

The Hot Pot line of Gel Timers incorporates all the quality features, simple operation, and accuracy of our original Gel Timer– and more! The Standard Hot Pot with a simple rheostat temperature controller. It uses a Teflon-lined aluminum pot and gel time can be determined at temperatures up to 350º F.

SIMPLE TO OPERATE

Set the control to the desired test temperature. Pour the prepared material sample into the throwaway aluminum cup. Place the cup in the Hot Pot Gel Timer well, insert the throwaway wire stirrer bottom in the cup and the top to the shaft spindle, and set the counter to “zero”. Switch on. When gelation occurs, read gel time and discard the cup and stirrer. The Hot Pot Gel Timer motor can remain stalled for short periods without harm. Unattended testing using heating capability is not recommended.

NO MESS! NO TOOLS REQUIRED! NO CLEANUP!

These durable gel timers use inexpensive, disposable wire stirrers and aluminum cups. No special skills are required.

Specifications

Maximum recording time: 9999 hours, 59 minutes, and 59 seconds

Minimum recording time: 1 second

Stir speed: 20 rpm

Accuracy: +/- 2%

Operating temperature: 125-350 deg. F (52-177 deg. C) +/- 5º C

Electrical requirements: 110v/60Hz or 220v/50Hz, 300 watts

Electrical connection: 3-wire grounded cord set

Dimensions: 12″ L x 10″ H x 8″ W

**As of August 2024, our aluminum housing Hot Pot housings are discontinued. All Hot Pot housings are 3D printed.